Richard Serra: Survey
Eight sculptures made from forged weatherproof steel, titled Equal, dated 2015.

Richard Serra

Equal, 2015
Forged weatherproof steel
Eight (8) identical blocks, each: 60 x 66 x 72 inches (152.4 x 167.6 x 182.9 cm) Installed in four (4) stacks of two (2) blocks each, each stack: 11 feet (3.4 m) high One: 60 x 66 x 72 inches (152.4 x 167.6 x 182.9 cm), 72 x 60 x 66 inches (182.9 x 152.4 x 167.6 cm) One: 72 x 66 x 60 inches (182.9 x 167.6 x 152.4 cm), 60 x 72 x 66 inches (152.4 x 182.9 x 167.6 cm) One: 66 x 60 x 72 inches (167.6 x 152.4 x 182.9 cm), 66 x 60 x 72 inches (167.6 x 152.4 x 182.9 cm) One: 66 x 72 x 60 inches (167.6 x 182.9 x 152.4 cm), 66 x 60 x 72 inches (167.6 x 152.4 x 182.9 cm)
Permanent installation of four weatherproof steel blocks in the The Brouq Nature Reserve, Qatar, titled East-West/West-East, dated 2014.

Richard Serra

East-West/West-East, 2014
Weatherproof steel
Two plates, each 55 x 13 feet x 5 inches (16.7 m x 4 m x 13.5 cm) Two plates, each 48 x 13 feet x 5 inches (16.7 m x 4 m x 13.5 cm) Permanent installation in The Brouq Nature Reserve, Qatar
Installation view of steel sculpture by Richard Serra at the Grand Palais, dated 2008.

Richard Serra

Promenade, 2008
Weatherproof steel
Five slabs, each: 55′ 9 1/4 x 13′ 1 1/2 x 5′ 1/8 inches (17 m x 4 m x 13 cm)
A steel sculpture by Richard Serra titled Sequence, dated 2006.

Richard Serra

Sequence, 2006
Weatherproof steel
Overall: 12′ 9 x 40′ 8 x 65′ 2 inches (3.9 x 12.4 x 19.9 m), plates: 2 inches (5.1 cm) thick
Installation view at the Guggenheim Bilbao of The Matter of Time by Richard Serra, comprised of eight pieces steel sculptures

Richard Serra

The Matter of Time, 2005
Installation, Guggenheim Bilbao.
From foreground to rear: Torqued Spiral (Closed Open Closed Open Closed), 2003; Torqued Ellipse, 2003-4; Double Torqued Ellipse, 2003-4; Snake, 1994-97; Torqued Spiral (Right Left), 2003-4; Torqued Spiral (Open Left Closed Right), 2003-4; Between the Torus and the Sphere, 2003-5; Blind Spot Reversed, 2003-5.
Installation view of Iron Mountain Run by Richard Serra, comprised of seven steel sculptures, dated 2002.

Richard Serra

Iron Mountain Run, 2002
Weatherproof steel in seven (7) parts
15 feet x 15 feet x 3 inches 4.6 m x 4.6 m x 7.6 cm
Installation view of steel sculpture Te Tuhirangi Contour by Richard Serra, dated 2000-2002.

Richard Serra

Te Tuhirangi Contour, 2000-2002
Weatherproof steel
19 feet 8 inches x 843 feet 2 inches x 2 inches (6 m x 257 m x 5.1 cm)
Two steel sculptures by Richard Serra titled Walking is Measuring, dated 1999-2000.

Richard Serra

Walking is Measuring, 1999-2000
Weatherproof steel
Two slabs: 18 x 8 feet x 5 inches (5.5 m x 2.4 m x 12.7 cm), 15′ 6 inches x 8 feet x 5 inches (4.7 m x 2.4 m x 12.7 cm)
Ten steel slab sculptures by Richard Serra, titled Elevations for L'Allée de la Mormaire, dated 1993.

Richard Serra

Elevations for L'Allée de la Mormaire, 1993
Weatherproof steel
Ten slabs, three: 68 x 20’6 x 12 inches (172.7 cm x 6.3 m x 30.5 cm), four: 60 x 16′ 5 x 12 inches (152.4 cm x 5 m x 30.5 cm), three: 52 x 12′ 4 x 12 inches (132.1 x 3.8 m x 30.5 cm)
Four steel conical slab sculptures by Richard Serra titled Intersection, dated 1992.

Richard Serra

Intersection, 1992
Weatherproof steel
Four identical conical sections inverted relative to each other, two: 12′ 1 1/2 inches (3.7 m) high x 42′ 8 inches (13 m) along the chord x 2 1/8 inches thick, two: 12′ 1 1/2 inches (3.7 m) x 40′ 10 inches (12.4 cm) along the chord x 2 1/8 inches (5.4 cm) thick
A sculpture by Richard Serra made of five trapezoidal steel slabs, titled Fulcrum, dated 1986-87.

Richard Serra

Fulcrum, 1986-87
Weatherproof steel
Five trapezoidal plates, four: 55 x 14 feet x 3 inches (16.7 m x 4.3 m x 7.6 cm), one: 54′ 6 3/4 x 14′ 6 x 3 inches (16.6 m x 4.4 m x 7.6 cm)
A sculpture by Richard Serra made of four slabs of steel, titled Equal-Parallel: Guernica-Bengasi, dated 1986.

Richard Serra

Equal-Parallel: Guernica-Bengasi, 1986
Weatherproof steel
Four slabs, two: 58 1/2 x 58 1/2 x 9 1/2 inches (148.6 x 148.6 x 24.1 cm), two: 58 1/2 x 16′ 4 1/8 x 9 1/2 inches (148.6 cm x 5 m x 24.1 cm)
A sculpture by Richard Serra made of two identical conical sections, inverted relative to each other, titled Clara Clara, dated 1983.

Richard Serra

Clara Clara, 1983
Weatherproof steel
Two identical conical sections inverted relative to each other, one: 12 feet (3.7 m) high x 109 inches (33.2 m) along the chord x 2 inches (5.1 cm) thick; one: 12 feet (3.7 m) high x 107′ 10 inches (32.8 m) along the chord x 2 inches (5.1 cm) thick
A sculpture by Richard Serra titled St. John’s Rotary Arc, dated 1980.

Richard Serra

St. John’s Rotary Arc, 1980
Weatherproof steel
Cylindrical section: 12 feet (3.6 m) high x 180 feet (54.9 m) along the chord x 2 1/2 inches (6.4 cm) thick
A hot-rolled steel sculpture by Richard Serra titled Extended Cantilever, dated 1980.

Richard Serra

Extended Cantilever, 1980
Hot-rolled steel
Eighteen plates, each: 6′ 6 3/4 x 14′ 9 x 1 inches (2 m x 4.5 x 2.5 cm)
A forged weatherproof steel sculpture by Richard Serra titled Berlin Block (for Charlie Chaplin), dated 1977.

Richard Serra

Berlin Block (for Charlie Chaplin), 1977
Forged weatherproof steel
6’3 x 6’3 x 6’3 inches (190.5 x 190.5 x 190.5 cm)
A sculpture by Richard Serra titled Terminal, dated 1977.

Richard Serra

Terminal, 1977
Weatherproof steel
Four trapezoidal plates, each: 41 x 12 feet x 2 1/2 inches (12.5 m x 3.7 m x 6.4 cm)
A hot-rolled steel sculpture made of two plates parallel to each other on the ceiling and floor by Richard Serra titled Delineator, dated 1974-75.

Richard Serra

Delineator, 1974-75
Hot-rolled steel
Two plates, each: 1 inch x 10 x 26 feet (2.5 cm x 3.1 m x 7.9 m)
A hot-rolled steel sculpture by Richard Serra titled To Encircle Base Plate Hexagram, Right Angles Inverted, dated 1970.

Richard Serra

To Encircle Base Plate Hexagram, Right Angles Inverted, 1970
Hot-rolled steel
26 feet (7.9 m) diameter; flange: 8 inches (20.3 cm) wide
A sculpture by Richard Serra titled Strike: To Roberta and Rudy, dated 1969-71.

Richard Serra

Strike: To Roberta and Rudy, 1969-1971
Hot-rolled steel
Plate: 8′ 1 inches x 24 feet x 1 1/2 inches (246.4 x 731.5 x 3.8 cm)
A lead sculpture by Richard Serra titled One Ton Prop (House of Cards), dated 1969.

Richard Serra

One Ton Prop (House of Cards), 1969
Lead
Four plates, each: 48 x 48 x 1 inches (121.9 x 121.9 x 2.5 cm)
A lead sculpture by Richard Serra titled Prop, dated 1968.

Richard Serra

Prop, 1968
Lead
Plate: 60 x 60 x 1/8 inches (152.4 x 152.4 x 0.3 cm); pole: 8 feet (2.4 m) long, 4 3/4 inches (12 cm) diameter
A sculpture by Richard Serra made of vulcanized rubber and neon tubing titled Belts, dated 1966-67.

Richard Serra

Belts, 1966-67
Vulcanized rubber and neon tubing
6 x 25 feet x 20 inches (182.9 x 762 x 50.8 cm)
A vulcanized rubber sculpture by Richard Serra titled To Lift, dated 1967.

Richard Serra

To Lift, 1967
Vulcanized rubber
36 x 6’8 x 60 inches (91.4 x 203.2 x 152.4 cm)

    Read More Read Less

      Read More Read Less

          Inquire

          To learn more about this artwork, please provide your contact information.

          By sharing your details you agree to our Privacy Policy and Terms and Conditions.
          This site is also protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

          Inquire

          To learn more about available works, please provide your contact information

          By sharing your details you agree to our Privacy Policy and Terms and Conditions.This site is also
          protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

          Artwork Added

          Please note: There’s no guarantee that we can hold this work for you until you complete your purchase

          Subtotal  
          Shipping Calculated at next step

          Your Collection is Empty

          Error
          Error
          Something went wrong while loading this page. Please try again shortly.
          Something went wrong while loading this page. Please try again shortly.